Futaba S3150 Slim Digital Servo

This is the Futaba S3150 Digital Wing Aileron Servo with J Connector. Designed for aileron applications on gliders, jets, and electric planes.

This servo can produce high-current draw from your batteries. If using NiMh or LiPo batteries, make sure they are capable of delivering sufficient amps.

FEATURES: Coreless motor 2 ball bearings Metal gears Digitally enhanced microprocessors cut about half the response time from transmitter input to servo reaction Dust and water resistant-not water proof Compact design is especially suited for easy installation inside the wing of smaller gliders, jets and electric planes. Black plastic case One year warranty

INCLUDES: One S3150 Wing Aileron Digital Servo, one 1" (25mm) star shaped horn, one 1.5mm (39mm) star shaped horn, one 1.8" (45mm) straight arm, one 1.4" (35mm) diameter horn, two each-screws, eyelets, and grommets

SPECS:

Speed: .24 sec/60° @ 4.8V
Torque: 51.4 oz-in @ 4.8V
Dimensions: 1.2 x 0.4 x 1.1" (30 x 11 x 29mm)
Weight: .81oz (23g)
Power Supply: 4.8V (Futaba does NOT recommend using 6V)

COMMENTS: S3150 Digital Servo
Precautions, -It is best to avoid long leads and Y-harnesses especially with standard grade wires. If problems are encountered, consider using heavy duty wire such as Futaba's Heavy Duty Series.
Current Drain: This Digital Servo is specially designed for high- torque or high-speed, therefore very high current drain is normal at start-up. For ultimate performance when using this servo please review the following points.
1. Radio systems with the Battery Fail Safe function have a higher cut-off voltage setting which will cause shorter operation time.
2. When installing the servo, please check pushrod linkage to make sure there is no binding in order to prevent excessive power consumption and decrease the life of the motor and battery.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: