Futaba GY401 Gyro w/S9257 Digital Servo

This is the Futaba GY401 Gyro with an S9257 Digital Servo. This is a high performance, compact and lightweight AVCS) Angular Vector Control System gyro developed for model helicopters. Because the sensor and control circuit are integrated, it is simple to install.

FEATURES:
AVCS System: Since the rudder trim changes (caused by wind and other meteorological changes) the front, rear, and other Heli attitudes change and are automatically cancelled; tail (rudder) operation is easy, making it perfect for 3D flight. (also known as heading hold gyro) SMM Gyro Sensor: Use of this newly developed technology virtually eliminates rudder trim changes during flight (see COMMENTS). Digital Servo Compatible (DS Mode): DS mode makes it compatible with Futaba Digital Servos. This maximizes the high-speed response performance of the Digital Servo. Included high-speed S9257 Digital Servo boasts 28 oz-in torque and a speed of .08 sec/60° Remote Gain Function and Mode Switching Function Remote: Gain function allows sensitivity switching from the transmitter and mode switching function allows AVCS/normal gyro mode switching. Integrated, compact and lightweight design made possible by high density mounting technology. Conductive Resin Case: This case improves EMC (Electrostatic and electromagnetic interference) resistance. One year warranty

INCLUDES:
GY401 gyro
S9257 Digital servo with mounting hardware
Mini plastic adjustment screwdriver
Three mounting pads One instruction sheet

S2957 SPECS:
Dimensions: 1.4 x 0.6 x 1.1" (36 x 15 x 29mm)
Weight: .92oz (26g)
Torque: 28 oz-in (2.0 kg-cm) at 4.8V
Operating Speed: 0.08 sec/60° at 4.8V
Lead Length: 7.9" (200mm)

COMMENTS: Can be used in helicopters and airplanes (Due to 0-100% Gain Adjust). The new SMM (Silicon Micro Machine) technology is the integration of mechanical elements, sensors, actuators and electronics all brought together on a common substrate chip. This hobby industry first, results in a gyro sensor with an unprecedented level of functionality, reliability, and sophistication. This will not work with JR Digital servos. These have a different pulse. Voltage- use only with a 4.8V battery. (if you use it with a higher voltage battery it needs to be regulated to 5.2V).

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: